BM132RP - CRL 4" x 132" BM132RP Upright Wet Abrasive Belt Sander
C.R.Laurence
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF


View Larger Image

Catalog Number: BM132RP


  • Built-In 24" (610 mm) Glass Rest and Roller Platen

  • Heavy-Gauge Steel Welded Frame

  • Conveniently Converted from 220 to 440 Volts
  • Available for Purchase or Lease

  • Our CRL Heavy-Duty 4" x 132" (102 mm x 3.35 m) Upright Wet Abrasive Belt Sander is designed for continuous grinding, smoothing, and polishing of glass edges. It is similar in design to the 106" Model, but has larger diameter pulleys, and is twice the weight because of its heavy, reinforced construction.



    CRL 4" x 132" BM132RP Upright Wet Abrasive Belt Sander


     


    Other Products/Finishes:

    CATALOG NUMBER DESCRIPTION
    BM132RP CRL 4" x 132" BM132RP Upright Wet Abrasive Belt Sander

    Catalog Number:BM132RP
    Also Available in These Catalogs:
    CRL73R Tools, Machinery, and Equipment, PAGE 189K
    CRL53R Glass & Glazing Catalog, PAGE 206G
    CRL23R Frameless Shower Door and Mirror Hardware, PAGE 547J
    GMB15 Glass Machinery Brochure, PAGE MB02
    GG2014A European Glass & Glazing, PAGE TE033
    Belt Size:4" x 132" (102 mm x 3.35 m)
    Ship Via:No UPS - Common Carrier Only
    Shipping Weight:700 lb (317.51kg)

    You will be pleased with the superior performance of our 4" x 132" (102 mm x 3.35 m) Upright Wet Abrasive Belt Sander, and the years of dependable service it will give you. F.O.B. Local CRL service center. Must ship common carrier.

    CAUTION: When grinding, always wear protective safety glasses and an approved glass dust respirator. One of each is provided with the machine.

    ABRASIVE BELTS: These machines use standard 4" x 132" (102 x 3.35 m) abrasive belts. One 120 grit belt, one pair of safety glasses, and one approved respirator are furnished with each machine. A safety shield is mounted to the hood.

    MOTOR AND STARTER: A 1 HP, 3450 RPM motor, with V-Belt drive, provides all the power for normal usage. The motor is three phase, 60 Hz, 220 or 440 Volts. It is wired to a manual push button starter. Please specify power requirements.

    PULLEYS: Both pulleys are 8" (203 mm) diameter, and made of machined and balanced cast iron.

    BELT TENSION DEVICE: Eccentric type with locking handle and control knob for tracking the belt.

    BEARINGS: Standard ball bearings are used throughout the drive system.

    COOLANT SYSTEM: A water supply line with an electrical solenoid control valve and a low water consumption spray nozzle (3.5 gph @ 30 psi) are included for wet grinding.

    CAUTION: When grinding, always wear protective safety glasses and an approved glass dust respirator. One of each is provided with the machine.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.