This CRL Bench Model Belt Sander uses all standard 4" x 64" (102 mm x 1.63 m) Wet or Dry Abrasive Belts, and is specially designed for use in the shop or on the job site. It's perfect for bench work where there is only a limited need for edge-work capacity. This Sander can also be mounted right onto a glass truck for rough grinding, smoothing, and polishing the edges of glass on a job site. Water for wet grinding sprays on the back of the belt from a built-in spray nozzle connected to a built-in water tank. Just pour water in the holding tank and you can wet grind anywhere.

IMPORTANT NOTES: Always wear the proper safety gear when using any type of power tool. A Cat. No. GF1 Ground Fault Circuit Interrupt Device should be used with any type of wet-working electric tool.

All controls are built to OSHA requirements, utilizing CSA and UL Certified components.

UTILITIES:
Electrical - One Motor, Total 1 HP ( .745 kw)
Voltage - Single Phase, 60 Cycle, 115V AC
Power - 15 AMP Service @ 110V AC

BM64B SPECIFICATIONS:
Height: 39" (991 mm)
Width (Including Motor): 27" (686 mm)
Footprint: 27" x 18" (686 x 457 mm)
Shipping Weight: 200 Lbs. (91 kg)
Shipping Crate: 34" x 26" x 42"H (864 mm x 660 mm x 1.07 m)