B6N10D - CRL Mill Aluminum 120" B6N Series Standard Square Base Shoe Drilled with 9/16" Hole Pattern "D" for 5/8" Tempered Glass - 12" C.T.C.
C.R.Laurence
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF
Search


View Larger Image

Catalog Number: B6N10D


  • For 5/8" Monolithic Tempered Glass
    (Thickness Range 15.09 to 16.66 mm
    .595" to .656")

  • Typically Used as the Base Channel for
    Glass Railing Systems

  • Drilled and Counter Bored 12" on Center,
    or We Will Custom Drill to Your Specifications
  • Custom Cutting and Mitering Service Available
  • CRL Glass Railing Systems Meets
    NBC Load Requirements When Installed
    in Accordance to ICC-3269

  • CRL B6 Series Standard Square Base Shoe is used as the base channel for glass railing systems. It can be clad in six choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. The five engineered methods of attachment can be found in our HR11 catalog on pages B132 to B133, and associated fasteners are shown on pages B156 to B157. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.



    CRL Mill Aluminum 120" B6N Series Standard Square Base Shoe Drilled with 9/16" Hole Pattern "D" for 5/8" Tempered Glass - 12" C.T.C.


     


    Other Products/Finishes:

    CATALOG NUMBER DESCRIPTION
    B6N10 CRL Mill Aluminum 120" B6N Series Standard Square Base Shoe Un-drilled for 5/8" Tempered Glass - 12" C.T.C.
    B6N10D CRL Mill Aluminum 120" B6N Series Standard Square Base Shoe Drilled with 9/16" Hole Pattern "D" for 5/8" Tempered Glass - 12" C.T.C.
    B6N10F CRL Mill Aluminum 120" B6N Series Standard Square Base Shoe Drilled with 9/16" Fascia Pattern 'F' for 5/8" Tempered Glass - 12" C.T.C.
    B6NDC CRL Mill Aluminum 120" B6N Series Standard Square Base Shoe Drilled with 9/16" Fascia Pattern 'F' for 5/8" Tempered Glass - 12" C.T.C.
    B6NFC CRL Mill Aluminum 120" B6N Series Standard Square Base Shoe Drilled with 9/16" Fascia Pattern 'F' for 5/8" Tempered Glass - 12" C.T.C.

    Catalog Number:B6N10D
    Also Available in These Catalogs:
    HR18 Architectural Railing Systems 2018, PAGE 155B
    CRL93A Architectural Railings, PAGE HR028
    Stock Length:120" (3.05 m)
    Hole Size:9/16" (14.3 mm)
    Counter Bore x Depth:7/8" (22 mm) x 1/2" (12.7 mm)
    Ship Via:No UPS - Common Carrier Only
    Shipping Weight:86 lb (39.01kg)
    Minimum Order:1 Each

    No additional product information available at this time.

    CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method. All pre-drilled CRL Base Shoes have a +1/8 (3mm) / -1/16 (1.5mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.