For 1/4" (6 mm) Glass

An Excellent Choice for Partitions, Mezzanines, Wind Breaks, Railings and Much More

May Be Used on Wood or Metal Radius or Flat Surfaces
Use Monolithic Tempered Glass
Custom Painted Finishes Available Upon Request

CRL Z-Series Clamps are available in your choice of round or square shapes, and come in either economical zinc, or durable stainless steel construction. Z-Series glass clamps are available in sizes to accommodate glass thicknesses from 1/4" to 1/2" (6 to 12 mm).

CRL Chrome Z-Series Large Round Clamp for 1/4" Glass

Other Products/Finishes:

CATALOG NUMBER	DESCRIPTION	COLOR
Z106BN	CRL Brushed Nickel Z-Series Large Round Clamp for 1/4" Glass
Z106BR	CRL Brass Z-Series Large Round Clamp for 1/4" Glass
Z106CH	CRL Chrome Z-Series Large Round Clamp for 1/4" Glass
Z106GP	CRL Gold Plated Z-Series Large Round Clamp for 1/4" Glass
Z106SC	CRL Satin Chrome Z-Series Large Round Clamp for 1/4" Glass
Z106W	CRL White Z-Series Large Round Clamp for 1/4" Glass

More Details:

Catalog Number:

Z106CH

Also Available in These Catalogs:

CRL63R Architectural Railing Systems, PAGE 269R

CRL53R Glass & Glazing Catalog, PAGE 283G

HR18 Architectural Railing Systems 2018, PAGE 312B

SC18 Standoff and Clamp Hardware, PAGE 51SC

CRL63A Architectural Hardware Master, PAGE 612H

CRL93A Architectural Railings, PAGE HR106

Color:

Chrome

Width:

2-1/4" (57 mm)

Height:

2-1/8" (54 mm)

Glass Thickness:

1/4" (6 mm)

Ship Via:

Can Ship UPS

Shipping Weight:

1 lb (454g)

Minimum Order:

1 Each

Additional Product Information:

The radius base design can be applied on 2" (6 mm) tubing. By drilling a notch in the glass, the pin included with each clamp can be used to eliminate glass slippage. Popular applications are partitions, mezzanines, wind breaks, railings and other commercial uses. CRL Cat. No. ZB0LT14 (Bolt) and Cat. No. RN1420 (Rivet-Nut) are used for securing z-clamp to tubing. Appropriate gaskets are included with each clamp.

GLASS FABRICATION: 1/2" (12 mm) notch is required if using provided steel pin.

Important Notes:

For interior and exterior applications CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

For 1/4" (6 mm) Glass

An Excellent Choice for Partitions, Mezzanines, Wind Breaks, Railings and Much More

May Be Used on Wood or Metal Radius or Flat Surfaces Use Monolithic Tempered Glass Custom Painted Finishes Available Upon Request

CRL Z-Series Clamps are available in your choice of round or square shapes, and come in either economical zinc, or durable stainless steel construction. Z-Series glass clamps are available in sizes to accommodate glass thicknesses from 1/4" to 1/2" (6 to 12 mm).

May Be Used on Wood or Metal Radius or Flat Surfaces
Use Monolithic Tempered Glass
Custom Painted Finishes Available Upon Request