Conductive Two-Part Adhesive

Easy-to-Use Two-Part Conductive Adhesive for the Repair of Rear Defroster Power Tabs

Full Cure in 24 Hours or Less

The CRL Rear Defroster Connector Repair Kit is easy-to-use. Just mix equal parts of Part A Epoxy with Part B Hardener and apply with the reusable applicator stir stick. Apply the connector tab and keep immobilized for less than 10 minutes. Full cure will be obtained in 24 hours or less depending on temperature and thickness of material. Always use a minimal amount for fastest cures.

CRL Rear Defroster Connection Kit

Other Products/Finishes:

CATALOG NUMBER	DESCRIPTION
RDCRK	CRL Rear Defroster Connection Kit

More Details:

Catalog Number:

RDCRK

Also Available in These Catalogs:

CRL43 Auto Glass Tools and Hardware, PAGE A242

Contents:

.5 oz (14 g)

Ship Via:

Can Ship UPS

Shipping Weight:

2 oz (45g)

Additional Product Information:

No additional product information available at this time.

Important Notes:

It is important that this material cure for over 24 hours 77 degree and above prior to applying power to the tab. Material can be heated to accelerate the cure (149 to 248 degree) for 10 minutes.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.