The Wood's Powr-Grip® Quadra-Tilt Lifters feature a unique four-bar tilt mechanism that significantly reduces the effort of tilting heavy loads between flat and upright positions. This tilt mechanism also reduces hazards associated with lifting loads from upright racks. When a load is tilted to either the upright or the flat position, the lifter maintains the load position automatically without using latches, eliminating the tendency for a load to "kick back" at the operator's knees.

The Quadra-Tilt Rotator 1100 also features a dual vacuum system, 360 degree manual rotation, (re)movable pads and extension arms that accommodate a variety of load sizes and shapes.

The Dual Vacuum System features two vacuum line circuits, allowing the lifter to maintain the vacuum level for one circuit even if an unexpected vacuum loss occurs in the other one. This system is designed to reduce the risk of falling loads, which could result from breakage or other accidents that compromise one area of the vacuum system. In addition, it features audible and visible alarms that warn the operator whenever the vacuum level is not sufficient for lifting the maximum load weight. Complies with CE Standard EN 13155.

In addition to DC power and a dual vacuum system, this Powr-Grip® Rotator/Tilter features a highly adaptable pad frame and a remarkably low profile, for maximum flexibility in handling loads between buildings and scaffolding or similar tight work locations.

Standard Vacuum Pad Spread:

Minimum Width - 12" (305 mm)
Maximum Width - 52-3/4" (1.34 m)
Minimum Length - 35-1/2" (902 mm)
Maximum Length - 102" (2.59 m)

Number/Size of Pads:
6/11" (280 mm) Diameter Lipped Vacuum Pads

Lifting Capacity*: 1100 Lbs. (500 kg)

Per-Pad Capacity*: 184 Lbs. (84 kg)
(*On Smooth, non-porous surfaces. Please contact us for recommendations on other surfaces.)

Unit Weight: 188 Lbs. (86 kg)

Standard Operating Power: 12V DC, 8 AMP

Load Movement: Manual rotation, 360 degree edgewise, with automatic locking at each 1/4 revolution. Assisted manual tilt, 90 degrees between upright and flat.

Profile Thickness: 8" (203 mm) does not include load.

Standard Features:
Dual Vacuum System
Low Vacuum Warning Light and Buzzer
Green Lift Light
On-board Battery and Charger
Battery Energy Gauge
Vacuum Gauge
Vacuum Line Filter
Vacuum Reserve Tank
Spring-mounted Pads
(Re)movable Pad Mounts
Vacuum Pad Extension Arms
Blow-off for Quick Release

Available Options:

Vertical lift bar CAT NO. LB10VLB

Extensions for movable pad mounts CAT NO. CM6MEVL

For special sizes and capacities, please contact our Glass and Glazing Technical Sales.