PH20AA - CRL Satin Anodized Top Door Patch Fitting With 1NT303 Insert
C.R.Laurence
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF
Search


View Larger Image

Catalog Number: PH20AA
Finish: SATIN ANODIZED


  • For 3/8" or 1/2" (10 or 12 mm) Glass

  • With or Without Locks

  • 2-3/4" (70 mm) Pivot Setback
  • Use Monolithic Tempered Glass

  • CRL Top Gate Patch Fittings are used with all three of our gate and door pivots. It fits in the upper corner of the gate's glass panel, and requires a hole and cut-out in the glass. Available in brushed stainless steel finish, it comes complete with instructions and a glass cut-out template.



    CRL Satin Anodized Top Door Patch Fitting With 1NT303 Insert


     


    Other Products/Finishes:

    CATALOG NUMBER DESCRIPTION COLOR
    PH20AA CRL Satin Anodized Top Door Patch Fitting With 1NT303 Insert
    PH20ABR CRL Brass Top Door Patch Fitting with 1NT303 Insert
    PH20ABS CRL Brushed Stainless Top Door Patch Fitting With 1NT303 Insert
    PH20ADU CRL Dark Bronze Top Door Patch Fitting with 1NT303 Insert
    PH20AMBL CRL Matte Black Top Door Patch Fitting With 1NT303 Insert
    PH20APS CRL Polished Stainless Top Door Patch Fitting with 1NT303 Insert
    PH20ASB CRL Satin Brass Top Door Patch Fitting with 1NT303 Insert

    Catalog Number:PH20AA
    Also Available in These Catalogs:
    AH18 Architectural Hardware Catalog 2018, PAGE 206Z
    CRL63A Architectural Hardware Master, PAGE 370H
    CRL93A Architectural Hardware, PAGE CH119
    Color:Satin Anodized
    Ship Via:Can Ship UPS
    Shipping Weight:1 lb (454g)
    Minimum Order:1 Each

    The following guidelines are to be used when making a door using this hardware:

    Maximum Height: 102" (2.59 m)
    Maximum Weight: 194 lbs. (88 kg)
    Maximum Width: 42" (1.07 m)

    If the door exceeds any of these limitations, full door rails should be used.

    GLASS FABRICATION REQUIRED:
    One 3/4" (19 mm) Diameter
    Hole and Corner Notch

    COMES WITH:
    Template and Instructions

    Do Not Use With:
    PH42L, PH42R, PH43L or PH43R
    Transom Patch Fittings. They Require
    European Door Patch Fitting PH21A

    These fittings are not for use with Laminated Glass. The following guidelines are to be used when making a 1/2" glass door using this hardware: Maximum Height: 102" (2.59 m) Maximum Height: 176 Lbs. (80 kg) Maximum Width: 42" (1.09 m) If the door exceeds any of these limitations, full door rails should be used.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.