DCD2 - CRL 2" DCD Series Straight Shank Electro-Formed Diamond Drill
C.R.Laurence
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF
Search


View Larger Image

Catalog Number: DCD2


  • For Fast Cutting, High Production Runs

  • Extended Work Life

  • Two Mounting Styles to Choose From: Straight Shank or Belgian Type
  • DCD Feature 3/8" x 1-3/8" (9.5 x 35 mm) Shaft

  • CRL DCD and HBT Series Electro-Formed Diamond Drills have a thin wall with a 1/2" (12.7 mm) deep multi-layer of diamonds and bonding matrix. These drills are designed for high speed, high production drilling, and produce outstanding results when exacting conditions are met.



    CRL 2" DCD Series Straight Shank Electro-Formed Diamond Drill


     


    Other Products/Finishes:

    CATALOG NUMBER DESCRIPTION
    DCD14 CRL 1/4" DCD Series Straight Shank Electro-Formed Diamond Drill
    DCD516 CRL 5/16" DCD Series Straight Shank Electro-Formed Diamond Drill
    DCD38 CRL 3/8" DCD Series Straight Shank Electro-Formed Diamond Drill
    DCD716 CRL 7/16" DCD Series Straight Shank Electro-Formed Diamond Drill
    DCD12 CRL 1/2" DCD Series Straight Shank Electro-Formed Diamond Drill
    DCD1 CRL 1" DCD Series Straight Shank Electro-Formed Diamond Drill
    DCD2 CRL 2" DCD Series Straight Shank Electro-Formed Diamond Drill
    DCD214 CRL 2-1/4" DCD Series Straight Shank Electro-Formed Diamond Drill
    DCD3 CRL 3" DCD Series Straight Shank Electro-Formed Diamond Drill
    DCD312 CRL 3-1/2" DCD Series Straight Shank Electro-Formed Diamond Drill
    DCD4 CRL 4" DCD Series Straight Shank Electro-Formed Diamond Drill

    Catalog Number:DCD2
    Also Available in These Catalogs:
    CRL73R Tools, Machinery, and Equipment, PAGE 162K
    CRL53R Glass & Glazing Catalog, PAGE 195G
    CRL23R Frameless Shower Door and Mirror Hardware, PAGE 532J
    Diameter:2" (51 mm)
    RPM Range:1200
    Ship Via:Can Ship UPS
    Shipping Weight:8 oz (227g)
    Minimum Order:1 Each

    Due to the fragile nature of these types of drills, they should only be used in a precision machine, never allowing too much pressure to be applied. It is important to handle these types of diamond drills with care and use on flat surfaces only. Sharpening or "dressing" of these drills before each use will substantially increase their cutting capabilities.

    CRL DCD Series Diamond Drills have a very thin wall which makes them Extremely Fragile. They are intended for the drilling of flat (plate) glass ONLY, in a true running, production type drilling press. Never use in any type of hand drill. The use of these drills in any manner other than as specified above may damage them and will void any warranty. Always wear the proper safety gear including gloves and eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.