For 1-1/16" (25.52 mm) Laminated Tempered
Glass (12 x 1.52 x 12 mm)
Drilled and Counter Bored 11-13/16"
(300 mm) Center-to-Center, or We Will
Custom Drill to Your Specifications

Typically Used as the Base Channel for
Glass Railing Systems or Windscreens

Works with LTL10X TAPER-LOC® Taper Sets
Engineering Reports Available
CRL Recommends Consulting with the Glass
Fabricator Prior to Wet Setting
Laminated Tempered Glass
CRL Glass Railing Systems Meets
NBC Load Requirements When Installed
in Accordance to ICC-3842

The CRL L25S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.

CRL Mill Aluminum 118-1/8" L25S Series Standard Square Base Shoe Drilled with 13/16" Holes "D" Pattern

Other Products/Finishes:

CATALOG NUMBER	DESCRIPTION
L25S10	CRL Mill Aluminum 118-1/8" L25S Series Standard Square Base Shoe Undrilled
L25S10D	CRL Mill Aluminum 118-1/8" L25S Series Standard Square Base Shoe Drilled with 13/16" Holes "D" Pattern
L25S10D6	CRL Mill Aluminum 118-1/8" L25S Series Standard Square Base Shoe Drilled with 13/16" Holes Pattern "D"
L25S10F	CRL Mill Aluminum 118-1/8" L25S Series Standard Square Base Shoe Drilled with 9/16" Fascia Holes Patten "F"
L25S10F6	CRL Mill Aluminum 118-1/8" L25S Series Standard Square Base Shoe Drilled with 9/16" Fascia Holes Patten "F"

More Details:

Catalog Number:

L25S10D

Also Available in These Catalogs:

CRL63R Architectural Railing Systems, PAGE 148R

HR18 Architectural Railing Systems 2018, PAGE 174B

CRL53R Glass & Glazing Catalog, PAGE 568G

CRL63A Architectural Hardware Master, PAGE 594H

CRL93A Architectural Railings, PAGE HR038

LP11 Commercial Door Handles Catalog, PAGE L238

Stock Length:

118-1/8" (3 m)

Hole Size:

13/16" (20.6 mm)

Counter Bore x Depth
Holes Drilled C.T.C. :

1-1/4" (31.7 mm) x 1/2" (12.7 mm)
11-13/16" (300 mm)

Ship Via:

No UPS - Common Carrier Only

Shipping Weight:

102.83 lb (46.64kg)

Minimum Order:

1 Each

Additional Product Information:

GLASS SPECIFICATIONS:
For use with 1-1/16" (25.52 mm) Laminated Tempered Glass 1/2" x .060 x 1/2" (12 mm x 1.52 mm x 12 mm)
Thickness Range: 0.960" to 1.060" (24.40 to 26.92 mm) Will work with ASTM 1" (25.4 mm) Monolithic Tempered Glass Will not accommodate the full ASTM thickness range for 1-1/16" (27 mm) glass

Important Notes:

CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method. All pre-drilled CRL Base Shoes have a +1/8 (3mm) / -1/16 (1.5mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

For 1-1/16" (25.52 mm) Laminated Tempered Glass (12 x 1.52 x 12 mm) Drilled and Counter Bored 11-13/16" (300 mm) Center-to-Center, or We Will Custom Drill to Your Specifications

Typically Used as the Base Channel for Glass Railing Systems or Windscreens

Works with LTL10X TAPER-LOC® Taper Sets Engineering Reports Available CRL Recommends Consulting with the Glass Fabricator Prior to Wet Setting Laminated Tempered Glass CRL Glass Railing Systems Meets NBC Load Requirements When Installed in Accordance to ICC-3842

For 1-1/16" (25.52 mm) Laminated Tempered
Glass (12 x 1.52 x 12 mm)
Drilled and Counter Bored 11-13/16"
(300 mm) Center-to-Center, or We Will
Custom Drill to Your Specifications

Typically Used as the Base Channel for
Glass Railing Systems or Windscreens

Works with LTL10X TAPER-LOC® Taper Sets
Engineering Reports Available
CRL Recommends Consulting with the Glass
Fabricator Prior to Wet Setting
Laminated Tempered Glass
CRL Glass Railing Systems Meets
NBC Load Requirements When Installed
in Accordance to ICC-3842